【DeKe Electric】 Committed to Creating Genuine Value for Our Customers

【Popular Science】Three Core Performance Indicators of Terminal Crimping｜Complete Control Guide for Physical Profile, Mechanical Strength and Electrical Stability

Crimping is the core process for forming permanent and reliable joints between terminals and cables. A qualified crimp must meet three requirements simultaneously: favorable physical geometry, dependable mechanical performance and stable electrical performance. Non-compliance in any dimension may trigger hidden risks including contact resistance drift, wire breakage and signal failure under vibration, extreme temperatures and long-term energized operating conditions.

【Popular Science】Don’t Choose the Wrong Connector! Eight Major Classifications and Core Principles for Engineering Selection

Connectors act as the physical hubs of electrical systems, responsible for the transmission and exchange of electric power, signals and high-speed data. A wide range of connector types are available on the market, and engineers often encounter confusion during selection, resulting in PCB redesign, wire harness rework and incorrect material procurement. There is no single universal classification standard for connectors. The industry generally adopts eight overlapping dimensions for classification: locking structure, mounting method, transmission medium, frequency characteristics, functional application, form factor, target industry and special performance. Overlaps exist among different categories, and a single connector may span multiple classification dimensions.

【Popular Science】80% of Wire Harness Failures Stem from Crimping! A Complete Guide to Crimping Indicators, Defects and Process Control

A well-known view in the wire harness industry states that "80% of wire harness quality issues originate from crimping". Based on industry standards including USCAR‑21, IPC/WHMA‑A‑620 and IEC 60352‑2, this article elaborates on key indicators such as bell mouth, conductor brush, crimp height, tail remnant and insulation crimping. It also explains engineering implementation points of variation classification, process capability and SPC control charts, offering references for crimping processes in new energy, AI, medical and automation projects.

【Popular Science】How to Select Insulating Plastics for Connectors? Core Properties and Application Boundaries of PBT/ABS/LCP

The performance ceiling of connectors is largely determined by plastic‑insulating base materials. Connectors mainly consist of metallic conductors and insulating plastics. Terminals transmit current and signals, while plastic housings realize electrical isolation, terminal positioning and mechanical protection. Base materials differ significantly in heat resistance, dielectric properties and mechanical strength. Improper material selection may easily cause mass‑production issues such as insulation failure and latch fracture. Focusing on R&D and manufacturing of connectors for multiple industries, Guangdong Deke Electric objectively analyzes the performance boundaries and applicable scenarios of three commonly‑used plastics: PBT, ABS and LCP.

【Popular Science】In‑depth Analysis of Connector Corrosion Failure 丨 Disassembly of Corrosion Inducements from Four Dimensions

Connectors are critical components for power and signal transmission. Corrosion, a major cause of connector contact failures, tends to trigger sharp rise in contact resistance, signal interruption and equipment downtime. Referencing IPC, ISO 9227 and EIA‑364 specifications, this paper analyzes the root causes of corrosion from four aspects: environment, materials, processes and service conditions, providing references for connector selection, design and reliability‑verification across multiple industries. Guangdong Deke Electric is deeply engaged in connector R&D and manufacturing. Complying with the IATF16949 system, it can provide complete test reports including salt‑spray test reports.

【Popular Science 】Pitfalls in Component Selection: A Complete Guide to Classification Criteria & Application Scenario Selection for Board-to-Board, Wire-to-Board and Wire-to-Wire Connectors

At the schematic design and BOM component selection stages of hardware development, most engineers tend to confuse three basic interconnect connector types: board-to-board, wire-to-board and wire-to-wire connectors. Improper selection will trigger a series of implicit cost losses, including PCB redesign, rework of vehicle wiring harnesses, excess inventory of supply chain materials and extended R&D cycles. Combined with universal specifications in the electronic interconnection industry, this article systematically analyzes structural differences, applicable working conditions, key selection parameters and verification criteria for the three types of connectors.

【Popular Science】 From Individual Components to Complete Mating Assemblies | In-Depth Breakdown of Standardized Assembly Processes for Connectors

The stable electrical continuity, temperature and vibration resistance of connectors as well as the prevention of electrical faults fundamentally rely on standardized precision assembly. All types of connectors share identical assembly logic: terminals transmit electrical power and signals, plastic housings provide electrical insulation, latches prevent loosening, and auxiliary components deliver environmental protection. Guangdong Dekor Electric manufactures products in compliance with IATF16949 and IPC specifications. By reviewing historical defective cases and sorting out key assembly quality control points, we empower engineers to establish comprehensive assembly management and control systems.

【Popular Science】 Comprehensive Analysis of Precision Stamping for Connectors | Core Forming Processes, Key Technical Challenges and Quality Control Standards for Terminals

Terminals, spring contacts and shielding shells are core metal parts of connectors that realize electrical conduction, elastic clamping and electromagnetic shielding. They are mostly produced by high-speed precision progressive stamping technology. Ultra-thin metal strips are processed through dies and high-speed stamping machines, which is suitable for mass production and can achieve micron-level dimensional tolerances. Guangdong Dekor Electric specializes in manufacturing connector metal components for a wide range of industries. Abiding by IPC and IATF16949 standards, it elaborates on the stamping process flow, key control points, mass production difficulties and quality inspection specifications. This helps engineers fully understand metal forming mechanisms so as to optimize process design and whole-process quality control.

【Popular Science】 Selection Guide for Connector Plastic Housings — Comprehensive Analysis of Advantages, Disadvantages and Application Scenarios of Four Major Materials: PBT, PA66, PPS and LCP

During wiring harness R&D, engineers usually focus heavily on terminals while overlooking material selection for connector plastic housings, which tends to trigger mass-production defects such as housing blistering, latch fracture and declining insulation performance. Plastic housings undertake key functions including electrical insulation, locking retention, heat resistance and vibration resistance. The four prevailing engineering plastics adopted are PBT, glass-filled PA66, PPS and LCP. In strict accordance with USCAR and IPC standards and drawing upon abundant mass production experience, Dekor Electric has sorted out complete material selection principles, analyzed applicable scenarios for each plastic grade, and helped customers eliminate hidden risks arising from improper material specification.

【Popular Science】 The Vascular Network of Electrical Systems | Analysis of Core Composition, Standardized Processes and Multi-Scenario Applications of Wiring Harnesses

Within the extensive electrical networks of intelligent manufacturing, new energy equipment, communications and precision medical devices, wiring harnesses are easily overlooked yet indispensable basic components. Whether enabling the smooth operation of new energy vehicles, precise movements of industrial robots, reliable functioning of aerospace equipment, or orderly operation of smart home systems, wiring harnesses act as invisible neural networks running throughout entire devices. They continuously facilitate power transmission and signal interaction to sustain the stable operation of all kinds of electromechanical systems.

【Popular Science】 Automotive / Home Appliance / Industrial Wiring Harnesses | In-Depth Comparison of Operating Conditions & Standards for the Three Types of Harnesses

Many people wonder why automotive wiring harnesses cost far more than those used in refrigerators and washing machines, and the price gap stems from more than just wire gauge differences. Though all three types function to transmit electricity and signals, they differ drastically in operating conditions, safety standards, material selection and manufacturing processes. Guangdong Dekor Electric is engaged in the production of a wide range of connectors. In compliance with automotive-grade, home appliance and industrial specifications, we dissect the essential distinctions among the three categories of wiring harnesses from four dimensions and elaborate on the underlying engineering design logic.

【Popular Science】Amid the Boom of Computing Power, Robotics and New Energy – Why Wiring Harness Connectors Are the Hidden Core Lifeline of Intelligent Manufacturing

Computing power centers, humanoid robots, 800V new energy vehicles and intelligent manufacturing have attracted extensive attention, with the industry focusing on chips and algorithms. Wiring harnesses and connectors serve as the underlying infrastructure for power supply and signal transmission of equipment, determine the operational reliability of devices, and are indispensable core components. Specializing in the R&D of connectors across various sectors, Guangdong Dekor Electric analyzes industrial transformation and domestic substitution opportunities based on authoritative industry reports.

【Industry Consensus】 Why 80% of Automotive Wiring Harness Failures Stem from Terminal Crimping

In the fields of vehicle wiring harness R&D, quality control and after-sales traceability, there is an empirically proven conclusion backed by massive failure statistics within the industry: 80% of wiring harness quality failures originate from the terminal crimping process. Many wiring harness practitioners may doubt this statement at first glance. The complete manufacturing workflow of wiring harnesses covers multiple procedures including wire cutting and stripping, terminal crimping, pre-assembly into housings, taping, harness assembly and electrical testing of finished products. Why does crimping alone become the high-incidence area for failures?

【Popular Science】Tips for Quality Identification of Terminal Connectors – Rapid Screening via Appearance & Odor plus Analysis of Failure Hazards

In high-precision electrical sectors including new energy, artificial intelligence, medical devices, industrial automation and communications, terminal connectors serve as fundamental core components for power transmission and signal interaction. Product quality directly governs the stability, safety and service life of complete equipment. For procurement, process and quality control staff, mastering simple and efficient terminal quality screening methods can block inferior components from entering production at the source and mitigate subsequent failure risks such as insulation breakdown, poor contact, structural loosening and equipment shutdown.

【Popular Science】 Reliability Pain Points of Terminal Connectors – Analysis on Causes of Poor Contact, Dielectric Breakdown and Loosening & Disconnection

Guangdong Dekor Electric specializes in the R&D and production of terminals and connectors for various industries. In line with general connector specifications including USCAR, IPC and QC/T standards, we thoroughly analyze the formation mechanisms and full-chain inducing factors of three types of failures based on two core components: conductive contacts and insulating housings, providing reliable references for R&D component selection, quality inspection and wiring harness processes.

【Popular Science】 Automotive Wiring Harness Industry – Harness Composition, Stringent Automotive Specifications, Market Landscape and Eight Major Development Trends

Amid the sweeping trend of full vehicle electrification and intelligence, vehicle electrical and electronic architectures are undergoing continuous iteration and upgrading. As the core medium linking on-board ECUs, various sensors, actuators and the three-electric system, automotive wiring harnesses are responsible for vehicle-wide power distribution and signal transmission, earning them the moniker of a vehicle’s "blood vessels and nerves". Though seemingly basic components, they directly determine the operational stability of the entire vehicle. This article objectively analyzes the basic structure of wiring harnesses, stringent environmental performance requirements, manufacturing workflows, market landscape and industrial development trends, supported by relevant industry forecast data, current national automotive standards and the IATF automotive quality management system.

【Popular Science】 Why Is Terminal Crimping Regarded as the Lifeline of Wiring Harnesses?

Within the full processing workflow of wiring harnesses, terminal crimping is often referred to by industry engineers as the "core process" of harness manufacturing. Whether for automotive, industrial control or aerospace wiring harnesses, the long-term electrical continuity stability and vibration endurance life of finished products are entirely determined by crimp forming quality.

【Popular Science】 Breakdown of Five Core Wiring Harness Components | Understand the Complete Electrical Transmission System

Whether it is new energy vehicles, industrial robots, industrial control cabinets, home appliances or medical devices, wiring harnesses serve as the electrical transmission veins of complete equipment, undertaking core functions of power delivery and signal interaction. Many people only see bundled finished harnesses without knowing each internal component performs its unique role and interlocks closely with others.In compliance with IPC/WHMA and SAE wiring harness specifications, Guangdong Dekor Electric fully breaks down the five core components of wiring harnesses. It thoroughly explains the functions, material selection logic and failure risks of wires, terminals, connectors, protective materials and auxiliary accessories, serving as a selection reference for hardware R&D, harness process, procurement and quality personnel.

【 Popular Science】 Five Connection Methods of Wiring Harness Terminals, Core Advantages and Standardized Process Specifications！

Wiring harness terminals are core nodes for power and signal transmission, whose connection processes govern harness production efficiency, electrical stability, and resistance to vibration and temperature. Mainstream methods cover soldering, crimping, wire wrapping, IDC and screw clamping.Complying with IPC/WHMA-A-620 and SAE standards, Guangdong Dekor Electric summarizes process principles and scenarios, highlighting crimp connection’s strengths and standardized specifications to support engineers in terminal selection and process control.

【Popular Science】Comprehensive Analysis of 5 Types of Terminal Tabs — Optimize Structure to Eliminate Poor Contact and Rework Issues in Mass Production

Structures for wire termination, mating connection and board mounting directly determine the overall electrical continuity stability of finished products, automated production efficiency, total material cost, as well as long-term resistance to vibration, temperature fluctuation and corrosion. With years of profound experience in mass production of precision terminals and connectors, Guangdong Dekor Electric thoroughly analyzes the five most widely adopted terminal tab types in the industry based on IPC-A-610 electronic assembly standards, wiring harness crimping specifications and actual test data for automotive and industrial control applications: solder cup type, IDC insulation displacement slot type, crimp wire type, THT through-hole board-mount type and SMT surface-mount type.We conduct a comprehensive comparison covering structural principles, advantages and disadvantages, applicable scenarios and key pitfalls to avoid during selection. Our analysis covers consumer electronics, industrial control, new energy vehicles and energy storage sectors, helping engineers eliminate blind selection and reduce product failure risks at the source.

【Popular Science】Analysis of Core Connector Components — Coordination Logic, Service Life Differences and Optimization Solutions of Terminals and Housings

  A complete connector consists of two core components: terminals and connector housings, each with distinct and indispensable functions. Terminals serve as the electrical core for power and signal transmission, while housings provide mechanical protection including positioning, locking, insulation, vibration resistance and guiding. A stable and reliable connection system can only be achieved through precise matching and assembly of the two parts. Massive equipment failure data indicates that the main factor limiting overall connector service life is aging and failure of plastic housings, as terminals feature far superior material durability compared to plastic shells.Combined with SAE and IEC material standards for the wiring harness industry, Guangdong Dekor Electric provides a comprehensive breakdown covering component coordination, service life mechanisms, failure modes and long-term optimization solutions, serving as a reference for hardware R&D, wiring harness process engineering and procurement selection.

【Popular Science】Full Analysis of Four Mainstream Terminal Types: A One-Stop Reference for Wiring Harness R&D & Selection

Terminals are core conductive electrical connectors responsible for power transmission and signal transmission, widely applied in automotive, new energy, industrial control, medical and communication industries.In accordance with mass production standards, they are classified into four categories: precision progressive stamping metal terminals, pre-insulated crimp terminals, terminal blocks and dedicated PCB terminals. Guangdong Dekor Electric specializes in customized terminal manufacturing. The following content analyzes terminals in terms of materials, structures and applicable scenarios to facilitate your product selection.

【Popular Science】Cold-Pressed Terminals: Classification, Selection, Wire Matching & Standardized Quality Control Processes

This article conducts a comprehensive and systematic breakdown and analysis from six dimensions — basic definition of cold-pressed terminals, material manufacturing processes, color code identification specifications, cable matching requirements, crimping scheme selection, and finished product quality inspection — by referencing three authoritative domestic and international standards: DIN 46228, GB/T 3956 and UL486E.

【Popular Science】A Complete Overview of the Connector Industry Chain in 2026

Connectors serve as the core carrier for power and signal transmission in electronic devices. The global market size will reach USD 78.5 billion in 2026, and the industry is entering a critical transition phase from scale expansion to technological upgrading. This article sorts out the full landscape of the industrial chain quickly from four dimensions: upstream and downstream layout, market competition, growth tracks and industry trends.

【Popular Science】Terminal Plating Process Guide丨Layered Coating Design, Material Selection & Reliability Criteria

Plating is the core process that guarantees the contact performance of terminals. This article analyzes the composite electroplating structure of connector terminals layer by layer, compares the performance of mainstream plating options including tin plating, gold plating and silver plating, lists various reliability test standards, and sorts out common selection misconceptions in the industry. Combined with actual production processes, it helps engineers rationally formulate plating schemes to balance product reliability and manufacturing costs.

【Popular Science】In-depth Observation of the Terminal Connector Industry 2026丨Breakthrough of Domestic Precision Manufacturing, High-Voltage & Miniaturization Restructures a New Industrial Cycle！

Combining authoritative industrial data and current national standards, this paper analyzes the technological transformations, market pain points and import substitution trends of the terminal connector industry in 2026, and introduces the integrated precision connector supporting solutions offered by Deke Electric.

【Popular Science】Connector Termination Methods

【Popular Science】Addressing shrinkage of the plastic housing to strengthen the foundational quality of terminal connectors

【Deke Products】2.8 Series Automotive Connectors |2.8 Series Automotive Connectors: Stable & Reliable, Widely Adaptable, The Preferred Solution for In-Vehicle Connections

Reliable, safe and durable connectors are critical to the stable operation of circuits in automotive electronics, vehicle body wiring harnesses, on-board electrical appliances and new energy supporting equipment. Leveraging sophisticated manufacturing capabilities and stringent quality control, Guangdong Deke Electric launches the 2.8 Series automotive connectors, including a full range of housings such as DJ7021, DJ7031, DJ7041, DJ7061 and DJ7091, as well as matching square male and female terminals. All products feature verifiable genuine parameters and fully compliant performance, delivering cost-effective connection solutions for automotive applications.

【Popular Science】The Tiny Electroplated Layer Determines The Upper Limit Of Terminal Quality

【Popular Science】From Raw Materials To Finished Products, Where Is The Money Being Spent?

Understanding the cost of terminal connectors

【Popular Science】Copper Prices Break The '100,000' Mark; How Will The Connector Industry Find A Breakthrough?

【Dekor After-sales Service】Deke After-sales, Accompanying You Throughout

Taking Responsibility for Every Interaction

【Dekor Manufacturing】Deke Connectors丨 Connecting Everything and Empowering All Industries

DeKe provides professional and reliable connectivity solutions for multiple industries and scenarios.

【Dekor Manufacturing】Deke Connectors丨 Verification First, Reliability as the Foundation

Reliability Testing of Connectors

【Dekor News】Health Protection丨 Warm Accompaniment | Deke Electric 2026 All-staff Physical Examination Concluded Successfully

To effectively safeguard employees' physical and mental health, convey the corporate humanistic care, and consolidate the foundation of team health, Guangdong Deke Electric Co., Ltd. organized an annual physical examination activity for all staff on the morning of April 29, 2026. The company brought health services directly to the factory premises, delivering corporate warmth with practical actions.

【Dekor News】Rebuilding Systems for a New Journey丨 Uniting Hearts to Realize Deke’s Dream丨The 2026 Staff Conference of Deke Electric Concluded Successfully!

 On April 25, 2026, all employees of Guangdong Deke Electric Co., Ltd. gathered in the second-floor exhibition hall for the grand annual staff meeting. Centering on launching the system restructuring initiative, promoting core values and uniting all staff for forge-ahead momentum, the meeting successfully completed multiple agendas including institutional interpretation, election and commendation, and welfare announcement, drawing a new blueprint for the company’s high-quality development and standardized operation.

Compliance Reshapes the Landscape, Technology Drives Upgrading — Analysis of 2026 Connector Industry Development Trends！

  In 2026, the global connector industry is undergoing a structural transformation. With the entry into force of the EU ESPR Regulation, the widespread adoption of 800V high-voltage platforms for new energy vehicles, the wave of lead-free manufacturing, and the deepening of domestic substitution, the industry competition landscape is shifting from scale-based competition to comprehensive competition centered on quality, compliance and technology. According to a report released by Global Market Insights, the global connector market size will reach $78.5 billion in 2026 and is projected to grow to $109.1 billion by 2035, representing a compound annual growth rate (CAGR) of 3.7%. Among them, the Chinese market is expected to reach $33.3 billion, accounting for approximately 34.6% of the global total, firmly ranking as the world’s largest single market.         As a high-tech enterprise deeply engaged in precision connection solutions, Guangdong DECO Electric Co., Ltd. (hereinafter referred to as “DECO Electric”) combines cutting-edge industry dynamics with its own practices to conduct an in-depth analysis of the core development trends of the connector industry in 2026, providing references for industry development and facilitating the coordinated upgrading of the industrial chain.

DEKE Electric Deepens Its Footprint in Precision Connection Field

 Empowering New Development of New Energy & Intelligent Industries through Technological Innovation Contact Us (Click to Enter) Currently, the global electrical and electronic industry is witnessing the deep integration of new energy vehicles, 5G-Advanced, AIoT and industrial automation. As the "nerve endings" of electronic systems, connectors and terminals are rapidly evolving toward miniaturization, high speed, high reliability and green development.Guangdong DEKE Electric Co., Ltd. (hereinafter referred to as "DEKE Electric") is a national high-tech enterprise specializing in the R&D and manufacturing of connectors and terminals. Based on its R&D and production bases in Shenzhen and Dongguan, DEKE Electric continues to provide safe, stable and efficient connection solutions for customers in more than 60 countries and regions around the world through technological breakthroughs and quality excellence, forging steadily ahead amid industry transformation.

【Deke Products】VL Terminal Connector |6.2mm precise pitch, dual specifications for perfect compatibility, full coverage of high and low power applications.

 In the field of electrical connections, different devices exhibit significant differences in requirements for current-carrying capacity, voltage compatibility, and wire gauge compatibility. A connector that can precisely match both high and low power applications is key to enhancing equipment adaptability and stability.Guangdong DECO Electric has meticulously developed the VL Series 6.2mm Pitch Press-in Solder Bar Connectors, innovatively launching a dual-specification solution featuring a high-power industrial version and a low-power precision version. All performance parameters strictly comply with measured standards as specified in the product datasheet, with no exaggerated or false data. Centered on the standard 6.2mm pitch, these connectors achieve precise matching for both high and low power scenarios, delivering professional and reliable solutions for circuit connections across diverse application needs.

【Deke Products】L6.2 Terminal Connector |6.2mm Pitch Benchmark, Unlock New Industrial-Grade Connection Experience！

In industrial control, automotive electronics, smart home and other fields, the capabilities of connectors in high current carrying capacity, environmental interference resistance and multi-scenario adaptability directly determine the operational stability of equipment.With profound technical accumulation in the connector industry, Guangdong Donke Electric has launched the L6.2 Series 6.2mm Pitch Bar Connectors. Centered on the standard 6.2mm pitch, these connectors support multiple wire count configurations and full-scenario parameter design.All performance data is derived from actual measurements in the specification sheet, with no false or exaggerated claims. We provide industrial-grade solutions featuring strong carrying capacity, high reliability and wide adaptability for high-demand circuit connections.

【Deke Products】YL Terminal Connector |4.5mm precise pitch builds a reliable defense for electrical connections.

In the field of electrical connections, stable transmission, versatile compatibility and long‑lasting durability are core requirements.Guangdong Dekel Electric specializes in the R&D and manufacturing of connectors. We have elaborately developed the YL Series 4.5mm pitch crimp‑and‑solder bar connectors. Featuring precise parameter design, high‑quality materials and stable electrical performance, these connectors serve as a reliable connection solution for industrial control, electronic equipment, home appliance manufacturing and many other applications.All performance parameters are derived from actual measurements, fully meeting real‑world application needs and providing robust support for all kinds of circuit connections.

【Deke Products】63080 Terminal Connector |High voltage resistance, large current capacity, robust performance for multi-scenario applications.

  In industrial connections, power equipment and electronic devices, the current carrying capacity, voltage resistance and compatibility of connectors directly determine the stable operation and safety level of the equipment.Guangdong Deco Electric has long been engaged in the R&D and manufacturing of connectors.Its newly launched 63080 strip connector features hard-core specifications of 600V rated voltage and 15A rated current, together with a design compatible with multiple circuits and a wide range of wire gauges.Having passed stringent mechanical, electrical and environmental performance tests, it provides stable and reliable connection solutions for equipment in various fields, fully meeting the requirements of industrial‑grade applications.

【Deke Products】Large 4-Pin Terminal Connector | Ideal for 10A Heavy-Duty Applications, Stable & Reliable Connection

  In high-power equipment, industrial control and other scenarios with stringent connection performance requirements, a connector with strong load-bearing capacity and high stability is essential.Guangdong Dekel Electric has been deeply engaged in the connector field for many years. Based on actual measurement data of large 4-pin products, we have developed the Large 4-Pin Series Connectors specifically designed for heavy-duty applications.The series covers a full range of core components including terminals, housings and headers. All performance parameters are derived from real testing, rejecting false ratings, providing long-lasting and reliable connection assurance for equipment.

【Deke Products】FL terminal connector丨4.14mm pitch, a benchmark for stable, multi-pole heavy-duty connections!

In demanding scenarios such as industrial equipment and high-power home appliances that impose strict requirements on connection reliability and compatibility, a connector that balances load-bearing capacity and multiple specifications is essential.The FL Series Bar Connectors launched by Guangdong DEKE Electric Co., Ltd. include complete components such as terminals and multi-specification housings.All performance parameters are derived from actual testing with no false labeling. Adopting a standard 4.14mm pitch to meet diverse needs, they provide long-lasting and stable connection assurance for equipment.

【Deke Products】Mini 4P terminal connector丨2.5mm pitch, the reliable choice for multi-scenario connections!

In the signal and power transmission systems of electronic equipment, the stability of connectors directly determines product reliability.Guangdong Deco has been deeply engaged in the connector industry. Based on strict testing standards, we have developed the Small 4P (EI/Small 4P) series connectors, including core components such as terminals, housings, straight headers, right-angle headers, and high right-angle headers.All performance parameters are derived from actual measured data in the product approval documents, with no false specifications. We provide precise and secure connection solutions for equipment in multiple fields.

【Deke Products】BH3.5 terminal connector丨High-Voltage Protection, A New Choice for Precision Connection！

In scenarios involving high-voltage signal transmission for electronic devices, the insulation performance, voltage withstand rating and connection stability of connectors directly determine equipment safety and operational efficiency. Guangdong Deke Electric has launched the BH3.5 Bar-type Crimp Connector (BH3.5 PRESSURE WELDING BAR CONNECTOR) for this specific application. Featuring a compact 3.5mm pitch design, combined with core advantages such as ultra-high voltage withstand capacity and low contact resistance, it has become an optimal connection solution for high-voltage low-current scenarios. All performance parameters are derived from real tests, with traceable quality guaranteed!

【Deke Products】Mini EL terminal connector丨4.5mm Wire-to-Wire Connector (W2W Connector) – Compact Design, Exceptional Reliability!

    In scenarios such as miniaturized electronic devices, portable instruments and household appliance control circuits, connectors must not only meet the demand for stable connection, but also be adapted to compact installation spaces. Guangdong Deke Electric has accurately identified the needs of the niche market and launched the Mini EL Series Bar-type Crimp Connectors (Mini EL PRESSURE WELDING BAR CONNECTOR). With "compact design + stable performance" as its core, it provides highly efficient adaptive solutions for low-circuit-count connection scenarios. Every parameter is derived from real tests, and every design is tailored to practical requirements!

Steeds Soar, Create Glory Together | Deke Electric's 2026 Annual Gala Concludes Successfully

As the golden snake bids farewell to the old year and the steed steps into the spring, Deke Electric's 2026 Annual Gala themed Steeds Soar, Create Glory Together was held at the factory campus and concluded successfully on January 17th. All Deke colleagues gathered in joy; from the lively games in the afternoon, to the delicious feast at dinner, and the viewing of dazzling fireworks, we spent a wonderful time filled with laughter and touching moments together.

Good News! Guangdong Deke Electric Co., Ltd. Has Been Awarded the Title of "2025 Shenzhen Specialized, Refined, Featured and Innovative SME"

Deke Electric has always focused on the global field of electrical safety and connection. Relying on its core products including wire-to-board connectors, wire-to-wire connectors, automotive connector series, terminal block series and tube terminal series, the company provides high-reliability connection solutions for customers in new energy, automotive electronics, industrial control, consumer electronics and other industries. We adhere to technological innovation as the core driving force, set up a professional R&D team, made continuous breakthroughs in product design, material application, production technology and other aspects, accumulated a number of independent intellectual property rights, and built a solid technological moat.                Recently, Guangdong Deke Electric Co., Ltd. has brought exciting news: by virtue of its intensive efforts in the field of electrical connection, continuous technological innovation and outstanding market competitiveness, the company has successfully passed the certification as a "2025 Shenzhen Specialized, Refined, Featured and Innovative Enterprise". This is a high recognition from the government and the industry of Deke Electric’s professional strength and development potential, and a powerful affirmation of the company’s long-adhered development philosophy of "Focus, Innovation and Excellence".                Since its establishment, Deke Electric has always focused on the global field of electrical safety and connection. Relying on its core products including wire-to-board connectors, wire-to-wire connectors, automotive connector series, terminal block series and tube terminal series, the company provides high-reliability connection solutions for customers in new energy, automotive electronics, industrial control, consumer electronics and other industries. We adhere to technological innovation as the core driving force, set up a professional R&D team, made continuous breakthroughs in product design, material application, production technology and other aspects, accumulated a number of independent intellectual property rights, and built a solid technological moat.     Uphold "Specialized, Refined Featured and Innovative" to Drive High-quality Development          The certification as a "Specialized, Refined, Featured and Innovative Enterprise" is not only an honor, but also a responsibility. Going forward, Deke Electric will take this as a new starting point and continue to fulfill its corporate mission of "Devoting itself to the safety and connection of the global electrical industry": 1. Continue to deepen technological innovation:   Increase R&D investment, focus on the pain points of the industry, and launch more competitive products. 2. Refine products and services to perfection:   Adhere to strict quality standards and provide customers with safer and more reliable connection experiences. 3. Expand global market layout:   Leverage its technological and product advantages to further enhance the brand influence in the international market.          We will continue to focus on our core business, strengthen internal capabilities, strive to become a leading domestic and internationally renowned provider of electrical connection solutions, and contribute to the high-quality development of China’s manufacturing industry! → Contact Us (Click to Enter)

【Deke Products】EL terminal connector丨4.5MM Precision Quality, Guarantees Stable Connection~

 In the field of electrical connection, stability and compatibility are the core demands. Guangdong Deke Electric has been deeply engaged in the R&D and manufacturing of electrical components. Its launched EL Pressure Welding Bar Connector Series, backed by standardized design, high-quality materials and rigorous testing, has become a reliable connection solution for scenarios such as industrial control, electronic equipment and home appliance manufacturing. Today, let’s fully unlock the core advantages of this connector that boasts both practicality and stability!

【Deke Products】CH5.08 terminal connector丨Preferred 5.08mm Pitch: Triple Protection from Terminal + Housing + Wafer

  In scenarios such as industrial control and smart equipment where high connection stability is demanded, a connector featuring robust parameters, integrated component collaboration and wide-ranging adaptability is crucial.The CH5.08 terminal connector launched by Guangdong Deke Electric is centered on the 5.08mm standard pitch, covering a complete configuration of terminals, housings and headers. All performance data is derived from official certification documents, which is authentic and fully traceable, delivering reliable connection solutions for diverse application scenarios.

【Deke Products】SDN3.96 terminal connector丨The terminal + housing dual-excellent configuration builds a solid line of defense for reliable connections

In the connection system of electronic devices, the synergistic performance of terminals and housings directly determines connection stability. Backed by the measured data in the official specification approval, the SDN3.96 terminal connector from Guangdong Deke Electric focuses on terminal conduction efficiency and housing protection performance, creating a cost-effective connection solution suitable for multiple scenarios. All parameters are true and traceable, with no exaggerated publicity.

【Deke Products】VHseries terminal connector丨Full Product Range Coverage + Actual Test Data Unlock Reliable Connections Across Multiple Scenarios

   In fields such as industrial control and smart home appliances, the "compatibility, stability, and maintainability" of connectors directly affect the overall performance of equipment. Launched by Guangdong Deke Electric, the VH Series Terminal Connectors have become the preferred solution for multi-scenario connections, thanks to their complete full-line configuration including terminals, housings, wafer connectors, pin headers, and SMT connectors, as well as rigorously tested and verified high-performance parameters.

【Deke Products】CH3.96 terminal connector丨Backed by three core components with robust technology, the connection is more stable and reliable.

In fields such as industrial control and home appliance manufacturing, the reliability of connectors directly determines the operational safety of equipment. Guangdong Deke Electric has been deeply engaged in the connector industry for years and launched the CH3.96 terminal connector — a high-performance product where every technical parameter, from terminals to plastic housings and pin headers, is solid and fully validated. Whether for current transmission or signal conduction, it delivers impeccable performance with stable capabilities. Below is a detailed analysis based on actual test data.

【Deke Products】SMH250 terminal connector丨Build a solid connection defense line with data A reliable choice adaptable to multiple scenarios

 For engineers and procurement partners, a high-quality wire-to-wire connector is never just "usable" — it must stand the test of parameter accuracy, environmental adaptability, and long-term stability.With over a decade of deep expertise in the connector field, Guangdong Deke Electric Co., Ltd. leverages the IATF16949 automotive-grade quality system as its endorsement. The launched SMH250 wire-to-wire connector uses actual test data to eliminate "connection hazards" and has become the top choice for engineers in product selection.

【Deke Products】JAE2.5 terminal connector丨2.5mm Precision Pitch Empowering High-Efficiency Device Connections

Amid the trend of electronic device integration, "small size, high adaptability, and strong stability" have become the core demands for terminal connectors. Backed by years of connector R&D experience, Guangdong Deke Electric Co., Ltd. launches the JAE2.5 series terminal connectors. With a design benchmark of 2.5mm standardized pitch, the series balances signal transmission accuracy and installation flexibility, and is widely compatible with multiple fields such as consumer electronics, smart home, and industrial control. This article focuses on two core components of JAE – wire terminals and pin headers – and deciphers the core of its quality through real parameters and practical scenarios.

【Deke Products】SCN terminal connector丨Low Resistance & Anti-Loosening + Wide Temperature Your Go-To Choice for Reliable Connection & Solid Core Strength

 In the connection system of electronic devices, terminal connectors serve as both a "bridge" and a "barrier"—their contact reliability and protection performance directly affect the operational safety and service life of the equipment. With years of in-depth expertise in the connector industry, Guangdong Deke Electric Co., Ltd. has launched the SCN2.5 series terminal connectors. Centered on a 2.5mm precision pitch design, this series has become a trusted choice in fields such as consumer electronics, smart homes, and small instruments and meters, thanks to its solid parameter performance and user-friendly structural design. This article will focus on two core components: the SCN2.5 board-to-board terminal and the SCN2.5 housing, guiding you to understand the quality strength behind them.

【Deke Products】EH2.5terminal connector丨Low Contact Resistance & Leakage-Proof + Wide Temperature Adaptability Reliable Choice for High-Density Connections

In the core connection scenarios of electronic devices, the stability of terminal connectors directly determines the overall device performance. The EH Series Terminal Connectors from Guangdong DEKE Electric feature a core design with a standard pitch of 2.5mm. With precise parameters and versatile adaptability, they have become the preferred solution in fields such as industrial control and consumer electronics. Below, we provide a true and professional detailed analysis focusing on two core products: EH wire terminals and EH pin headers (straight pins, right-angle pins, and locating right-angle pins.

【Deke Products】XA2.5terminal connector丨precision pitch The Core Choice for Stable Connectio

In the critical connection scenarios of electronic devices, the stability of terminal connectors directly determines the overall machine performance and lifespan. Guangdong Decke Electric has long been committed to the connector field, launching the XA series terminal connectors, covering three core categories: wire-to-board, pin headers, and surface-mount devices. With industry-standard specifications and precision manufacturing processes, these products adapt to the stringent requirements of diverse scenarios from household appliances to industrial equipment, emerging as a trusted connection solution for enterprises.

A Decade of Craftsmanship, Connecting Everything Intelligently —— Deke’s Comprehensive Blueprint for Future Development

After more than a decade of dedicated focus on the terminal connector sector, Shenzhen Deke Electric Co., Ltd. (hereinafter referred to as "Deke Electric") has built a solid market foundation in the electronic information industry ecosystem, relying on reliable quality and technological accumulation. Faced with multiple opportunities—including the global manufacturing upgrade, the deepening of domestic substitution, and the boom in emerging tracks—Deke Electric will build on its past achievements, take technology as the core, market as the guideline, and ecosystem as the wing, and comprehensively lay out the development path of high-endization, intelligence, and globalization to embark on the next cycle of high-quality growth.

【Deke Products】XHD2.5terminal connector丨Precision Connection, Trusted Backbone Empower Stable Operation Across Multiple Fields

  In the circuit core of new energy vehicles, the control modules of smart homes, and the signal links of industrial equipment, terminal connectors serve as the "neural hub" ensuring the stable transmission of power and data. With years of deep expertise in the connector field, Guangdong Deke Electric has launched the XHD Series Terminal Connectors—backed by millimeter-level precision manufacturing and stringent quality control—that have become the preferred solution for industrial control, automotive electronics, communication equipment, and other sectors. Leveraging standardized design to adapt to diverse scenarios, it addresses connection pain points with robust performance.

【Deke Products】XHB2.5terminal connector丨3 Major Product Categories + Hardcore Data: Unlock New Precision Connection Solutions

Under the wave of Industry 4.0, connectors serve as the "neural hub" of electronic devices, and their reliability directly dictates the stability of system operation. From precision circuits in consumer electronics to demanding scenarios of military equipment, the XHB series terminal connectors by Guangdong Deke Electric have become the top choice for engineers in selection, thanks to their three core product categories and solid performance. Today, we will take you to unlock the technical core and application value of XHB wire-to-board, free-hanging, and SMD connectors.

【Deke Products】XH2.5terminal connector丨Standardized Design + Strict Quality Control Solidify the Connecting "Lifeline"

In the circuit systems of electronic devices, 2.5mm pitch terminal connectors serve as the core hub for signal and power transmission. With years of expertise in the connector field, Guangdong Deke Electric has developed the XH2.5 terminal connector family based on the industry-common XH standard. This family covers three main types: wire-to-board, wire-to-wire (free-hanging), and PCB board-end SMD. Leveraging standardized design and precise craftsmanship, it has become the preferred connection solution for equipment across multiple industries. Today, we will conduct a comprehensive analysis of this product series that combines both compatibility and reliability.

【Deke Products】PHSD（PHB）terminal connector丨Excellent in both compactness and anti-loosening performance building a solid safety barrier for connections

In interconnection scenarios for electronic devices, "high-density stability" and "flexibility & convenience" are two core requirements. Guangdong Deke Electric has deep expertise in precision connection technology and has developed two key series of terminal connectors to address these needs: the PHSD dual-row with latch, and the PHB airborne mating. The former breaks through the bottleneck of high-density connections with its dual-row locking structure, while the latter simplifies wiring processes through its airborne mating design—using precision innovation to meet diverse scenario needs.

【Deke Products】SAN2.0 terminal connector丨Within an inch lies precisionit sets a new benchmark forindustrial connectivity

    In the precision circuits of new energy vehicles, smart homes, and industrial control, terminal connectors serve as "neural hubs". However, common issues such as time-consuming wiring that impacts production line tempo, poor terminal contact leading to equipment downtime, and limited space on PCB boards restricting terminal installation — are quietly driving up enterprises’ labor costs and after-sales pressure.Guangdong Deke Electric has been deeply engaged in the terminal connector field for years. The SAN terminal connectors it has launched, featuring precise design and stable performance, have served over 1,000 manufacturing enterprises and become a practical choice in sectors like home appliances and automotive electronics.

【Deke Products】DuPont Series terminal connector丨Multi-Scenario Adaptation Precision Connection Defense

 In the field of electronic device connectivity, balancing "standardization" and "customization" has always been a core requirement. Guangdong Deke Electric has dedicated years to the R&D and production of terminal connectors. The launched DuPont Series Terminal Connectors, which include four variants—DuPont 2.0, DuPont 2.54, DuPont with Buckle, and DuPont with Lock—cover three core scenarios ("miniaturization, standardization, and anti-loosening") through differentiated designs. With precise parameters and stable performance, they have become a preferred connectivity solution in fields such as smart home, industrial control, and consumer electronics.

【Deke Products】HY2.0 terminal connector丨Efficient Connections, Empowering the Stable Operation of Electronic Devices

HY2.0 Terminal Connector Series Developed by Deke Electric to meet low-to-medium current connection requirements, the HY2.0 Terminal Connector Series is a precision connector product. It features a standard 2.0mm pitch design, which strikes an optimal balance between space utilization and conductive performance. This series boasts a rated current of up to 5A and a rated voltage of 300V AC/DC, making it widely applicable in fields such as smart home, medical devices, industrial automation, automotive electronics, and consumer electronics. It delivers stable and reliable power and signal transmission for various types of equipment. The complete HY2.0 Series comprises four core components: wire harnesses, pin headers, surface-mount devices (SMDs), and free-hanging connectors. Together, these components form a comprehensive connection solution that caters to diverse installation environments and connection needs.All products comply with international environmental standards and have passed rigorous quality inspections, ensuring stable performance in various complex environments.

【Deke Products】PHD2.0 terminal connector丨Precision Connection Empower the Future

 Today, as electronic devices become increasingly sophisticated, connectors—known as "electronic blood vessels"—play an increasingly crucial role. Having been deeply engaged in the connector field for many years, Guangdong Deke Electric has launched the PHD series of terminal connectors, which have become a benchmark product in the industry, thanks to its excellent manufacturing processes and strict quality control. This article will provide you with a detailed explanation of the technical highlights and application value of this precision connection solution, focusing on three categories: PHD wire harnesses, PHD pin headers, and PHD surface-mount components.

Automotive Connectors: Analysis of Core Application Scenarios and New Trends in Industry Development

In the context of the booming automotive industry, automotive connectors, as crucial components in automotive electrical systems, are like the nervous system of the human body. They bear the responsibility of connecting various electronic devices and systems, ensuring the stable transmission of information and electricity. Whether it is traditional fuel-powered vehicles or the rapidly emerging new energy vehicles, connectors are indispensable. From engine control systems to in-vehicle entertainment systems, from safety systems to intelligent driving assistance systems, automotive connectors are ubiquitous, and their performance directly affects the overall

【Deke Products】PA2.0 terminal connector丨Small pitch large energy A reliable choice for high-density connections

Amid the wave of new energy and industrial automation, the reliability and efficiency of electrical connections have become core indicators of equipment performance. Leveraging its accumulated technical expertise from deep engagement in the connector field, Guangdong Deke Electric Co., Ltd. has launched the PA2.0 terminal connector. Adhering to industry-leading design standards and stringent quality control, this product provides highly reliable connection solutions for new energy vehicles, industrial control, consumer electronics, and other fields. Below is an in-depth analysis of this star product from three dimensions: technical breakthroughs, application scenarios, and industry value.​

Automotive Connectors: Analysis of Core Application Scenarios and New Trends in Industry Development

In the current booming automotive industry, automotive connectors, as a crucial component in the automotive electrical system, are like the nervous system of the human body, undertaking the important task of connecting various electronic devices and systems and ensuring the stable transmission of information and power. Whether it is a traditional fuel - powered vehicle or a rapidly emerging new energy vehicle, connectors are indispensable. From the engine control system to the in - vehicle entertainment system, from the safety system to the intelligent driving assistance system, automotive connectors are everywhere, and their performance directly affects the overall performance and safety of the vehicle. As automotive technology continues to advance in the directions of electrification, intelligence, and connectivity, automotive connectors also face unprecedented opportunities and challenges.

【Deke Products】51005/51006 terminal connector丨Efficient Connection, Stable Transmission，Store energy for industrial equipment

In today's era of rapid development in intelligent manufacturing and precision electronic equipment, reliable electrical connections are the cornerstone of stable equipment operation. Leveraging its profound industry experience, Guangdong Deke Electric has launched the 51005/51006 terminal connectors. Boasting an ultra-small 2.0mm pitch design and industrial-grade performance, these connectors provide cost-effective connection solutions for fields such as consumer electronics, automotive electronics, and industrial control.   ​

【Deke Products】SZN1.5 terminal connector丨precision connection Define new industrial standards

Today, as electronic devices move towards miniaturization and high density, the size of connectors is just as important as their performance. Guangdong Deke Electric has been deeply engaged in the connector field for many years, and today unveils the SZN1.5 terminal connector—developed specifically for precision connections. With its exquisite design featuring a 1.5mm pitch, it provides efficient connection solutions for fields such as consumer electronics, automotive electronics, and industrial equipment.

【Deke Products】JC series Terminal Connector丨precision connection Empower the industrial future

Today, as industrial automation and new energy technologies develop rapidly, terminal connectors, serving as the core hub for power and signal transmission, have their reliability and adaptability directly impacting equipment performance. Guangdong Deke Electric Co., Ltd., having been deeply engaged in the connector field for years, has launched the JC series terminal connectors through technological accumulation and innovative breakthroughs. With superior quality, it provides stable and efficient connection solutions for industrial equipment. This article will focus on analyzing the three major models—JC15, JC20, and JC25—taking you to appreciate the technical charm of Deke Electric.​

【Deke Products】PH2.0 Terminal Connector丨Precise Connection Excellent Choice

In the field of electronic manufacturing, every signal transmission and every power delivery relies on the reliable operation of terminal connectors. The PH2.0 terminal connector, with its exquisite 2.0mm pitch, takes precision design to the extreme. It not only achieves efficient connection in compact spaces, but also, with its excellent electrical performance and mechanical stability, has become a favorite among numerous engineers and manufacturers, making it an outstanding choice in the field of precision connections. 

【Deke Products】ZH 1.5 Terminal Connector丨Efficient ConnectionThe Industrial Choice for Stable Transmission

  In fields such as industrial automation, power control, and communication equipment, stable and efficient electrical connections are crucial to ensuring the normal operation of systems. ZH terminal connectors stand out with their 1.5mm precision pitch. Compared with other connectors with common pitches, the 1.5mm pitch enables a more compact layout while ensuring stable signal transmission, making it ideal for electronic devices that have strict space requirements and need to ensure connection reliability. Thanks to its excellent performance, flexible configurations, and reliable quality, it has become the trusted choice of many engineers.

【Deke Products】 1.25 connector丨small in size, strong in connectivity, empowering precision electronic devices.

  In the world of electronic devices, the reliability and efficiency of connections are of vital importance. Guangdong Deke Electric Co., Ltd. has been deeply engaged in the connector field. The 1.25 series terminal connectors it has launched, including various types such as 1.25 standard, 1.25 ultra-thin, 1.25 blank, 1.25 vertical mount, 1.25 horizontal mount, and 1.25 through-hole, provide perfect connection solutions for different industries and application scenarios.

【Deke Products】NH1.0 Terminal Connector丨An Excellent Choice for Electronic Connections

In fields such as industrial automation, power control, and communication equipment, stable and efficient electrical connections are crucial to ensuring the normal operation of systems. The ZH terminal connector stands out with its precise 1.5mm pitch. Compared with connectors with other common pitches, the 1.5mm pitch, while ensuring stable signal transmission, enables a more compact layout. This makes it particularly suitable for electronic devices that have strict space requirements yet need to ensure connection reliability. With its excellent performance, flexible configuration, and reliable quality, it has become a trusted choice among numerous engineers.

【Deke Products】SH1.0 Terminal Connector丨Industrial Connection

In the intricate network of modern industry, terminal connectors are like invisible bridges, silently shouldering the responsibility of linking various components. Imagine that the various circuits and components in electronic devices and electrical systems are just like the crisscrossing roads and buildings in a city, while terminal connectors are the bridges that closely connect these roads and buildings, ensuring the smooth flow of electric current and signals and enabling the entire industrial system to operate efficiently. Though unassuming, they play an indispensable role in industrial production, electronic device manufacturing, and other fields, serving as a crucial link in ensuring the stable operation of equipment. So, among numerous terminal connectors, what unique features does our SH1.0 Terminal Connector possess to stand out in the highly competitive market?

【Deke Products】HY Fully Wrapped Terminal丨Electrical Connection Innovator

In the world of electrical connections, every small innovation may trigger significant changes in the industry. Today, Guangdong Deke Electric Co., Ltd. is proud to introduce to you a revolutionary product — the HY Fully-Encapsulated Terminal. Built on the basis of the widely recognized HY2.0 Terminal, it is a newly upgraded "Master Connector" that has undergone countless tests and optimizations by the R&D team. It is set to inject unprecedented vitality into the field of electrical connections.

【Deke Products】composite terminal丨New electrical connection options

In the tide of the rapid development of modern industry, electrical connection, as a key link in power and signal transmission, is like the nervous system of the human body, ensuring the stable operation of various devices and systems. From large and complex industrial production lines to the electronic devices we use in daily life, reliable electrical connections are the cornerstone of their efficient operation. Once electrical connections develop issues, on a small scale, they may lead to equipment failures and production interruptions; on a large scale, they could even trigger safety accidents, resulting in immeasurable losses.

Warm congratulations to DeKe Electric on passing the IATF16949 certification!

In the fierce competition of the automotive industry, quality and management standards are the foundation for enterprises to gain a foothold. Today, we are proud to announce that DeKe Electric has successfully passed the IATF16949 international automotive industry quality management system certification! This milestone achievement marks that DeKe has reached a new height in the pursuit of quality management.

Terminal crimping precautions

Today, Deke will share with you the precautions for crimping one terminal of a terminal. First, we need to confirm that the corresponding die and blade are matched with our single terminal before crimping, otherwise, no matter how to adjust the crimping, the crimping will not be able to Qualified products; then what problems will we encounter when crimping;

Types and uses of terminals

General terminal. It is suitable for the connection of inner and outer wires or cables of the screen, that is, it is used for the connection of wires at both ends of the same circuit.

The functional parts of the terminals and their functions

The locking device of the terminal in the sheath, the self-locking opening of the conventional terminal generally has 3 positions, the front of the terminal, the back of the terminal, and the two sides of the terminal. outside the jacket).

What are the crimp types of terminals?

In the F-shaped crimping, after the cold stamping connection, the terminal insulation crimping area is not allowed to puncture the wire core. This type of crimping is widely used, and the sheath inner terminal used in the domestic vehicle wiring harness Some of them use this type of crimping, such as in-car wiring harnesses produced by Guangzhou Toyota and FAW.

Break through the predicament

Recently, many people may be very confused, irritable, and overwhelmed. It is true that everyone feels the crisis when the order plummets, but I think this is a turning point and adjustment period for us, and a preparation period for the future rise.

Deke Electric continues to introduce advanced production equipment and testing equipment at home and abroad

Japan imported injection molding machine, high-speed punch, automatic assembly machine, Tokyo precision three-coordinate machine, high and low temperature detector, salt spray tester

"Deke 2022 Official Website" is officially launched!

"Deke 2022 Official Website" will be officially launched on August 25, 2022! Let's witness the moment of history together, grow and progress together!